Skip to main content
Electrical Engineering

Return to Question

added 56 characters in body
Source Link
FewWords
FewWords
  • 113
  • 1
  • 1
  • 4

I am having a problem creating a cable to connect with two devices. The first devisce is an Intellivue MP70 that I want to connect to the RS232 port using an RJ45 end. On the other side there should also be a RJ45 connection that should be connected to a Lantronix EDS-MD Server, and i cantcan't figure out the pin assignment.

I got the following image:

enter image description here

And the following table:

enter image description here

However, as you can see this is a connection from RJ45 to DB9. How do I translate this so i get RJ45 on both ends of the cable?

I can also mention that I have access to a RJ45 to Screw terminal adaptor on one side.

I am having a problem creating a cable to connect with two devices. The first devisce is an Intellivue MP70 that I want to connect to the RS232 port using an RJ45 end. On the other side there should also be a RJ45 connection and i cant figure out the pin assignment.

I got the following image:

enter image description here

And the following table:

enter image description here

However, as you can see this is a connection from RJ45 to DB9. How do I translate this so i get RJ45 on both ends of the cable?

I can also mention that I have access to a RJ45 to Screw terminal adaptor on one side.

I am having a problem creating a cable to connect with two devices. The first devisce is an Intellivue MP70 that I want to connect to the RS232 port using an RJ45 end. On the other side there should also be a RJ45 connection that should be connected to a Lantronix EDS-MD Server, and i can't figure out the pin assignment.

I got the following image:

enter image description here

And the following table:

enter image description here

However, as you can see this is a connection from RJ45 to DB9. How do I translate this so i get RJ45 on both ends of the cable?

I can also mention that I have access to a RJ45 to Screw terminal adaptor on one side.

Source Link
FewWords
FewWords
  • 113
  • 1
  • 1
  • 4

Pin assignment on rj45 when using rs232

I am having a problem creating a cable to connect with two devices. The first devisce is an Intellivue MP70 that I want to connect to the RS232 port using an RJ45 end. On the other side there should also be a RJ45 connection and i cant figure out the pin assignment.

I got the following image:

enter image description here

And the following table:

enter image description here

However, as you can see this is a connection from RJ45 to DB9. How do I translate this so i get RJ45 on both ends of the cable?

I can also mention that I have access to a RJ45 to Screw terminal adaptor on one side.