Hello I am looking on some analog and digital multiplexers that have high supply voltage along with high amounts of channels and I've found some that are programmable either serially or parallely and I am wondering how I should interpret the timing characteristics in the datasheet.
So for example lets look at these two multiplexer circuits from Analog Devices and Intersil respectively, AD75019 and CD22M3494.
The data load time of the AD75019 is 52µs since the max serial clock speed is 5MHz and 256 bits need to be loaded in order to program it.
On the CD22M3494 however there isn't any load time parameter since it is programmed parallely, so the parameter that I should compare the AD75019 to is what?
I've looked at some other multiplexers that are programmed parallely as well and some of them have a parameter called "Switching frequency" which I would assume is the one parameter that I should look at in this particular case, but on the CD22M3494 however I can't seem to find any parameter for this.
Can anyone help me and point me in the right direction?