Skip to main content
Electrical Engineering

Return to Question

Commonmark migration
Source Link
Community Bot
Community Bot
  • 1

Following this question, @curious_cat had more questions in comments that deserve a proper Q here:

Is there any standard encoding that has evolved on the digital encoding side? Just as 4 to 20 mA is de facto standard on the analog side especially in process control?

 

So I wonder, in applications where rapid change is crucial, say airplane control, avionics etc. what sort of protocols have become the convention? Do they use 4 to 20 mA or PWM or dedicated buses?

Following this question, @curious_cat had more questions in comments that deserve a proper Q here:

Is there any standard encoding that has evolved on the digital encoding side? Just as 4 to 20 mA is de facto standard on the analog side especially in process control?

 

So I wonder, in applications where rapid change is crucial, say airplane control, avionics etc. what sort of protocols have become the convention? Do they use 4 to 20 mA or PWM or dedicated buses?

Following this question, @curious_cat had more questions in comments that deserve a proper Q here:

Is there any standard encoding that has evolved on the digital encoding side? Just as 4 to 20 mA is de facto standard on the analog side especially in process control?

So I wonder, in applications where rapid change is crucial, say airplane control, avionics etc. what sort of protocols have become the convention? Do they use 4 to 20 mA or PWM or dedicated buses?

replaced http://electronics.stackexchange.com/ with https://electronics.stackexchange.com/
Source Link
Community Bot
Community Bot
  • 1

Following thisthis question, @curious_cat had more questions in comments that deserve a proper Q here:

Is there any standard encoding that has evolved on the digital encoding side? Just as 4 to 20 mA is de facto standard on the analog side especially in process control?

So I wonder, in applications where rapid change is crucial, say airplane control, avionics etc. what sort of protocols have become the convention? Do they use 4 to 20 mA or PWM or dedicated buses?

Following this question, @curious_cat had more questions in comments that deserve a proper Q here:

Is there any standard encoding that has evolved on the digital encoding side? Just as 4 to 20 mA is de facto standard on the analog side especially in process control?

So I wonder, in applications where rapid change is crucial, say airplane control, avionics etc. what sort of protocols have become the convention? Do they use 4 to 20 mA or PWM or dedicated buses?

Following this question, @curious_cat had more questions in comments that deserve a proper Q here:

Is there any standard encoding that has evolved on the digital encoding side? Just as 4 to 20 mA is de facto standard on the analog side especially in process control?

So I wonder, in applications where rapid change is crucial, say airplane control, avionics etc. what sort of protocols have become the convention? Do they use 4 to 20 mA or PWM or dedicated buses?

Source Link
Marcus Müller
Marcus Müller
  • 100.1k
  • 5
  • 141
  • 262

Are there standards for digital sensor links?

Following this question, @curious_cat had more questions in comments that deserve a proper Q here:

Is there any standard encoding that has evolved on the digital encoding side? Just as 4 to 20 mA is de facto standard on the analog side especially in process control?

So I wonder, in applications where rapid change is crucial, say airplane control, avionics etc. what sort of protocols have become the convention? Do they use 4 to 20 mA or PWM or dedicated buses?