Timeline for Altium - Invisible unrouted nets/components?
Current License: CC BY-SA 4.0
13 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
Aug 30, 2019 at 16:18 | answer | added | Jedi Engineer | timeline score: 2 | |
Aug 30, 2019 at 15:55 | comment | added | The Photon | Sounds like a bug. You could enter a case/post on the Altium forums and very likely an Altium apps engineer will help you sort it out. | |
Aug 30, 2019 at 15:54 | comment | added | Jedi Engineer | @ThePhoton I do get unrouted net violations, not using online DRC. | |
Aug 30, 2019 at 15:49 | comment | added | The Photon | If you run batch DRC, do you get unrouted net violations for those connections? Or is it only an online DRC problem? | |
Aug 30, 2019 at 15:42 | comment | added | Jedi Engineer | @Axis yes I have them all on. | |
Aug 30, 2019 at 15:31 | comment | added | Axis | Are you sure you have all layers turned on? | |
Aug 30, 2019 at 15:21 | history | edited | Jedi Engineer | CC BY-SA 4.0 |
edited title
|
Aug 30, 2019 at 14:50 | comment | added | Jedi Engineer | @PeterSmith - had the same thought, tried that too. Nothing there. Selected the whole area and deleted it... Still persists. | |
Aug 30, 2019 at 14:50 | comment | added | Peter Smith | Another reason that this can happen is that if there is a tiny piece of copper assigned (assuming you had routed them previously) which you will need to significantly zoom in on to actually see, it retains the net ID. | |
Aug 30, 2019 at 14:49 | comment | added | Jedi Engineer | @PeterSmith That did not work - tried already. | |
Aug 30, 2019 at 14:48 | history | edited | Jedi Engineer | CC BY-SA 4.0 |
added 47 characters in body
|
Aug 30, 2019 at 14:44 | comment | added | Peter Smith | I have had this in the past; I seem to recall that running a design rules check from within the PCB environment fixed it. | |
Aug 30, 2019 at 14:37 | history | asked | Jedi Engineer | CC BY-SA 4.0 |