Timeline for Why should we modify the voltage source value if the resistor is connected with it directly?
Current License: CC BY-SA 4.0
7 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Feb 17, 2020 at 23:47 | vote | accept | shineele | ||
| Feb 17, 2020 at 15:31 | comment | added | brhans | In the 2nd circuit you're skipping an intermediate step. What is the equivalent of voltage source V1 in series with resistor R4? Then what is the equivalent of that 'thing' in parallel with resistor R1? | |
| Feb 17, 2020 at 15:20 | answer | added | The Photon | timeline score: 2 | |
| Feb 17, 2020 at 15:11 | comment | added | Andy aka | You seem to be answering your own question. | |
| Feb 17, 2020 at 15:10 | comment | added | DKNguyen | Because the series resistor R4 means no one thing is connected directly across V1. Voltage across R1 will change with current due to R4. | |
| Feb 17, 2020 at 15:10 | comment | added | Huisman | The voltage source changes for same reason as that R4 changes from 6 ohm to 4 ohm... What theory did you use to find the equivalent circuit? | |
| Feb 17, 2020 at 15:05 | history | asked | shineele | CC BY-SA 4.0 |