Skip to main content
Electrical Engineering

Return to Question

Bumped by Community user
added 154 characters in body
Source Link
sapphire
sapphire
  • 13
  • 3

I will combine 4 ac/dc converter (1000 W) by using parallel operation mode to create 4 kW unit. I will add 4 LEDs to observe converter signal health.

There are digital output including POWER ON SIGNAL, AC GOOD SIGNAL and POWER OK SIGNAL. I added related piece of datasheet. And I added a design. Can you say that whether it is true or not.

  1. I want to ask that can I use these digital outputs to drive directly 5V LED or do I have to use a external microcontroller (like Arduino) to determine HIGH/LOW state and drive LED by usign external microcontroller(like Arduino) digital outputs?
  2. And which of AC/DC converter digital outputs (POWER ON SIGNAL and POWER OK SIGNAL) should I use to determine that output DC is OK? Can you advise me a way?

enter image description here

enter image description here

I will combine 4 ac/dc converter (1000 W) by using parallel operation mode to create 4 kW unit. I will add 4 LEDs to observe converter signal health.

There are digital output including POWER ON SIGNAL, AC GOOD SIGNAL and POWER OK SIGNAL. I added related piece of datasheet.

  1. I want to ask that can I use these digital outputs to drive directly 5V LED or do I have to use a external microcontroller (like Arduino) to determine HIGH/LOW state and drive LED by usign external microcontroller(like Arduino) digital outputs?
  2. And which of AC/DC converter digital outputs (POWER ON SIGNAL and POWER OK SIGNAL) should I use to determine that output DC is OK? Can you advise me a way?

enter image description here

I will combine 4 ac/dc converter (1000 W) by using parallel operation mode to create 4 kW unit. I will add 4 LEDs to observe converter signal health.

There are digital output including POWER ON SIGNAL, AC GOOD SIGNAL and POWER OK SIGNAL. I added related piece of datasheet. And I added a design. Can you say that whether it is true or not.

  1. I want to ask that can I use these digital outputs to drive directly 5V LED or do I have to use a external microcontroller (like Arduino) to determine HIGH/LOW state and drive LED by usign external microcontroller(like Arduino) digital outputs?
  2. And which of AC/DC converter digital outputs (POWER ON SIGNAL and POWER OK SIGNAL) should I use to determine that output DC is OK? Can you advise me a way?

enter image description here

enter image description here

deleted 20 characters in body
Source Link
Transistor
Transistor
  • 180.3k
  • 14
  • 194
  • 417

I will combine 4 ac/dc converter ( 1000W 1000 W) by using parallel operation mode to create 4kW4 kW unit. I will add 4 ledLEDs to observe converter signal health. 

There are digital output including POWER ON SIGNAL, AC GOOD SIGNAL and POWER OK SIGNAL. I added related piece of datasheet. I want to ask that can I use these digital outputs to drive directly 5V LED to determine DC output is on or off? Or Do I have to use a external microcontroller (like Arduino) to determine HIGH/LOW state and drive LED by using external microcontroller(like Arduino) digital outputs? And Which of ac/dc converter digital outputs(POWER ON SIGNAL and POWER OK SIGNAL) should I use to determine that output dc is OK? Can you advise me a way ?

  1. I want to ask that can I use these digital outputs to drive directly 5V LED or do I have to use a external microcontroller (like Arduino) to determine HIGH/LOW state and drive LED by usign external microcontroller(like Arduino) digital outputs?
  2. And which of AC/DC converter digital outputs (POWER ON SIGNAL and POWER OK SIGNAL) should I use to determine that output DC is OK? Can you advise me a way?

enter image description here

I will combine 4 ac/dc converter ( 1000W ) by using parallel operation mode to create 4kW unit. I will add 4 led to observe converter signal health. There are digital output including POWER ON SIGNAL, AC GOOD SIGNAL and POWER OK SIGNAL. I added related piece of datasheet. I want to ask that can I use these digital outputs to drive directly 5V LED to determine DC output is on or off? Or Do I have to use a external microcontroller (like Arduino) to determine HIGH/LOW state and drive LED by using external microcontroller(like Arduino) digital outputs? And Which of ac/dc converter digital outputs(POWER ON SIGNAL and POWER OK SIGNAL) should I use to determine that output dc is OK? Can you advise me a way ?

enter image description here

I will combine 4 ac/dc converter (1000 W) by using parallel operation mode to create 4 kW unit. I will add 4 LEDs to observe converter signal health. 

There are digital output including POWER ON SIGNAL, AC GOOD SIGNAL and POWER OK SIGNAL. I added related piece of datasheet.

  1. I want to ask that can I use these digital outputs to drive directly 5V LED or do I have to use a external microcontroller (like Arduino) to determine HIGH/LOW state and drive LED by usign external microcontroller(like Arduino) digital outputs?
  2. And which of AC/DC converter digital outputs (POWER ON SIGNAL and POWER OK SIGNAL) should I use to determine that output DC is OK? Can you advise me a way?

enter image description here

Source Link
sapphire
sapphire
  • 13
  • 3

Power Supply AC/DC Power OK Signal Control

I will combine 4 ac/dc converter ( 1000W ) by using parallel operation mode to create 4kW unit. I will add 4 led to observe converter signal health. There are digital output including POWER ON SIGNAL, AC GOOD SIGNAL and POWER OK SIGNAL. I added related piece of datasheet. I want to ask that can I use these digital outputs to drive directly 5V LED to determine DC output is on or off? Or Do I have to use a external microcontroller (like Arduino) to determine HIGH/LOW state and drive LED by using external microcontroller(like Arduino) digital outputs? And Which of ac/dc converter digital outputs(POWER ON SIGNAL and POWER OK SIGNAL) should I use to determine that output dc is OK? Can you advise me a way ?

enter image description here