Skip to main content
Bumped by Community user
solution
Source Link

I'm having a hard time with the maximum power disposable from a generator derivation, it's something that I should know but I'm confused about it.

schematic

simulate this circuit – Schematic created using CircuitLab

My Professor started with this circuit and the complex power $$W_g= \frac{V_g I_g^*}{2}$$ Where \$V_g\$ and \$I_g\$ are phasors, he then said \$I_g=\frac{V_g}{Z_g+Z_a}\$, then we hypotize the MPT condition (Maximum Power Transfer) so \$Z_g=Z_a^*\$.

Now we have $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a}$$

At this point we can substitute the Ig in the formula of power obtaining: $$W_g= \frac{V_g I_g^*}{2}= \frac{|V_g|^2}{8R_g}$$ Ok so the result is correct but the mathematical passage is not clear to me, because if you substitute the current there is a 2 factor that doesn't show in the math.

Edit with solution

The problem was stupid because i named Vg over the resistor and the Vg of the voltage generator the same, I had to use the voltage partition formula over \$ R_g\$ to get the \$V_{g_{resistor}}\$ and then multiply it by the current. in formulas: we have (MPT) $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a} $$ $$V_{g_{resistor}} =\frac{R_g}{R_g+R_a}V_g = \frac{V_g}{2}$$ $$W_g= \frac{V_{g_{resistor}} I_g^*}{2}=\frac{V_{g} I_g^*}{4}=\frac{|V_g|^2}{8R_g}$$

I'm having a hard time with the maximum power disposable from a generator derivation, it's something that I should know but I'm confused about it.

schematic

simulate this circuit – Schematic created using CircuitLab

My Professor started with this circuit and the complex power $$W_g= \frac{V_g I_g^*}{2}$$ Where \$V_g\$ and \$I_g\$ are phasors, he then said \$I_g=\frac{V_g}{Z_g+Z_a}\$, then we hypotize the MPT condition (Maximum Power Transfer) so \$Z_g=Z_a^*\$.

Now we have $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a}$$

At this point we can substitute the Ig in the formula of power obtaining: $$W_g= \frac{V_g I_g^*}{2}= \frac{|V_g|^2}{8R_g}$$ Ok so the result is correct but the mathematical passage is not clear to me, because if you substitute the current there is a 2 factor that doesn't show in the math

I'm having a hard time with the maximum power disposable from a generator derivation, it's something that I should know but I'm confused about it.

schematic

simulate this circuit – Schematic created using CircuitLab

My Professor started with this circuit and the complex power $$W_g= \frac{V_g I_g^*}{2}$$ Where \$V_g\$ and \$I_g\$ are phasors, he then said \$I_g=\frac{V_g}{Z_g+Z_a}\$, then we hypotize the MPT condition (Maximum Power Transfer) so \$Z_g=Z_a^*\$.

Now we have $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a}$$

At this point we can substitute the Ig in the formula of power obtaining: $$W_g= \frac{V_g I_g^*}{2}= \frac{|V_g|^2}{8R_g}$$ Ok so the result is correct but the mathematical passage is not clear to me, because if you substitute the current there is a 2 factor that doesn't show in the math.

Edit with solution

The problem was stupid because i named Vg over the resistor and the Vg of the voltage generator the same, I had to use the voltage partition formula over \$ R_g\$ to get the \$V_{g_{resistor}}\$ and then multiply it by the current. in formulas: we have (MPT) $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a} $$ $$V_{g_{resistor}} =\frac{R_g}{R_g+R_a}V_g = \frac{V_g}{2}$$ $$W_g= \frac{V_{g_{resistor}} I_g^*}{2}=\frac{V_{g} I_g^*}{4}=\frac{|V_g|^2}{8R_g}$$

edited title; added 1 character in body
Source Link

Maximum power disposableavailable of a generator derivation

I'm having a hard time with the maximum power disposable from a generator derivation, it's something that I should know but I'm confused about it.

schematic

simulate this circuit – Schematic created using CircuitLab

My Professor started with this circuit and the complex power $$W_g= \frac{V_g I_g^*}{2}$$ Where \$V_g\$ and \$I_g\$ are phasors, he then said \$I_g=\frac{V_g}{Z_g+Z_a}\$, then we hypotize the MPT condition (Maximum Power Transfer) so \$Z_g=Z_a^*\$.

Now we nowhave $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a}$$

At this point we can substitute the Ig in the formula of power obtaining: $$W_g= \frac{V_g I_g^*}{2}= \frac{|V_g|^2}{8R_g}$$ Ok so the result is correct but the mathematical passage is not clear to me, because if you substitute the current there is a 2 factor that doesn't show in the math

Maximum power disposable of a generator derivation

I'm having a hard time with the maximum power disposable from a generator derivation, it's something that I should know but I'm confused about it.

schematic

simulate this circuit – Schematic created using CircuitLab

My Professor started with this circuit and the complex power $$W_g= \frac{V_g I_g^*}{2}$$ Where \$V_g\$ and \$I_g\$ are phasors, he then said \$I_g=\frac{V_g}{Z_g+Z_a}\$, then we hypotize the MPT condition (Maximum Power Transfer) so \$Z_g=Z_a^*\$.

Now we now $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a}$$

At this point we can substitute the Ig in the formula of power obtaining: $$W_g= \frac{V_g I_g^*}{2}= \frac{|V_g|^2}{8R_g}$$ Ok so the result is correct but the mathematical passage is not clear to me, because if you substitute the current there is a 2 factor that doesn't show in the math

Maximum power available of a generator derivation

I'm having a hard time with the maximum power disposable from a generator derivation, it's something that I should know but I'm confused about it.

schematic

simulate this circuit – Schematic created using CircuitLab

My Professor started with this circuit and the complex power $$W_g= \frac{V_g I_g^*}{2}$$ Where \$V_g\$ and \$I_g\$ are phasors, he then said \$I_g=\frac{V_g}{Z_g+Z_a}\$, then we hypotize the MPT condition (Maximum Power Transfer) so \$Z_g=Z_a^*\$.

Now we have $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a}$$

At this point we can substitute the Ig in the formula of power obtaining: $$W_g= \frac{V_g I_g^*}{2}= \frac{|V_g|^2}{8R_g}$$ Ok so the result is correct but the mathematical passage is not clear to me, because if you substitute the current there is a 2 factor that doesn't show in the math

added 88 characters in body; edited title
Source Link

Maximum power disposable of a generator derivation

I'm having a hard time with the maximum power disposable from a generator derivation, it's something that I should know but I'm confused about it.

schematic

simulate this circuit – Schematic created using CircuitLab

My Professor started with this circuit and the complex power $$W_g= \frac{V_g I_g^*}{2}$$ Where \$V_g\$ and \$I_g\$ are phasors, he then said \$I_g=\frac{V_g}{Z_g+Z_a}\$, then we hypotize the MPT condition (Maximum Power Transfer) so \$Z_g=Z_a^*\$.

Now we now $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a}$$

At this point we can substitute the Ig in the formula of power obtaining: $$W_g= \frac{V_g I_g^*}{2}= \frac{|V_g|^2}{8R_g}$$ Ok so the result is correct but the mathematical passage is not clear to me., because if you substitute the current there is a 2 factor that doesn't show in the math

Maximum power disposable derivation

I'm having a hard time with the maximum power disposable from a generator derivation, it's something that I should know but I'm confused about it.

schematic

simulate this circuit – Schematic created using CircuitLab

My Professor started with this circuit and the complex power $$W_g= \frac{V_g I_g^*}{2}$$ Where \$V_g\$ and \$I_g\$ are phasors, he then said \$I_g=\frac{V_g}{Z_g+Z_a}\$, then we hypotize the MPT condition (Maximum Power Transfer) so \$Z_g=Z_a^*\$.

Now we now $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a}$$

At this point we can substitute the Ig in the formula of power obtaining: $$W_g= \frac{V_g I_g^*}{2}= \frac{|V_g|^2}{8R_g}$$ Ok so the result is correct but the mathematical passage is not clear to me.

Maximum power disposable of a generator derivation

I'm having a hard time with the maximum power disposable from a generator derivation, it's something that I should know but I'm confused about it.

schematic

simulate this circuit – Schematic created using CircuitLab

My Professor started with this circuit and the complex power $$W_g= \frac{V_g I_g^*}{2}$$ Where \$V_g\$ and \$I_g\$ are phasors, he then said \$I_g=\frac{V_g}{Z_g+Z_a}\$, then we hypotize the MPT condition (Maximum Power Transfer) so \$Z_g=Z_a^*\$.

Now we now $$I_g=\frac{V_g}{2R_g}=\frac{V_g}{2R_a}$$

At this point we can substitute the Ig in the formula of power obtaining: $$W_g= \frac{V_g I_g^*}{2}= \frac{|V_g|^2}{8R_g}$$ Ok so the result is correct but the mathematical passage is not clear to me, because if you substitute the current there is a 2 factor that doesn't show in the math

Source Link
Loading