Skip to main content
Electrical Engineering

Return to Question

Bumped by Community user
Bumped by Community user
Bumped by Community user
Bumped by Community user
edited title
Link
ocrdu
ocrdu
  • 9.3k
  • 23
  • 32
  • 42

Charge settings for hybrid car battery module

deleted 12 characters in body; edited tags
Source Link
ocrdu
ocrdu
  • 9.3k
  • 23
  • 32
  • 42

I am currently overhauling and replacing worn battery modules for my Toyota hybrid vehicle. I have purchased a SkyRC q400 smart charger to charge all the six cell Nimh-cell NiMH modules before I assemble them back into the 200v200 V battery. They are each rated at 6500mha6500 mAh with a voltage of 7.2 V (1.2v2 V per cell). Could

Could somebody tell me the best charge current setting please and also if it is best to discharge the battery first before iI do my first set of charges? What is the best discharge rate as well?

Thanks

I am currently overhauling and replacing worn battery modules for my Toyota hybrid vehicle. I have purchased a SkyRC q400 smart charger to charge all the six cell Nimh modules before I assemble them back into the 200v battery. They are each rated at 6500mha with a voltage of 7.2 (1.2v per cell). Could somebody tell me the best charge current setting please and also if it is best to discharge the battery first before i do my first set of charges? What is the best discharge rate as well?

Thanks

I am currently overhauling and replacing worn battery modules for my Toyota hybrid vehicle. I have purchased a SkyRC q400 smart charger to charge all the six-cell NiMH modules before I assemble them back into the 200 V battery. They are each rated at 6500 mAh with a voltage of 7.2 V (1.2 V per cell).

Could somebody tell me the best charge current setting please and also if it is best to discharge the battery first before I do my first set of charges? What is the best discharge rate?

Bumped by Community user
Source Link
Lee Atwood
Lee Atwood
  • 11
  • 2

Charge settings for hybrid battery module

I am currently overhauling and replacing worn battery modules for my Toyota hybrid vehicle. I have purchased a SkyRC q400 smart charger to charge all the six cell Nimh modules before I assemble them back into the 200v battery. They are each rated at 6500mha with a voltage of 7.2 (1.2v per cell). Could somebody tell me the best charge current setting please and also if it is best to discharge the battery first before i do my first set of charges? What is the best discharge rate as well?

Thanks