Skip to main content
Electrical Engineering

Return to Question

added 268 characters in body
Source Link
kintaro
kintaro
  • 347
  • 2
  • 8

I am looking for a way to create a Transimpedance Amplifier like below (to convert current to voltage)
enter image description here enter image description here
The problem now is how to add the current source?
enter image description here
The current I want is the one read from I_probe like the circuit below.
How do I transfer this current to the Amplifier without affecting the circuit below?
(The frequency of Vf_Square can be very low, just I need to record the initial current when the voltage first goes up. According the the simulation, the initial current is kept until the voltage goes back down. That initial current is what I need for the amplifier)
enter image description here

I am looking for a way to create a Transimpedance Amplifier like below (to convert current to voltage)
enter image description here enter image description here
The problem now is how to add the current source?
enter image description here
The current I want is the one read from I_probe like the circuit below.
How do I transfer this current to the Amplifier without affecting the circuit below? enter image description here

I am looking for a way to create a Transimpedance Amplifier like below (to convert current to voltage)
enter image description here enter image description here
The problem now is how to add the current source?
The current I want is the one read from I_probe like the circuit below.
How do I transfer this current to the Amplifier without affecting the circuit below?
(The frequency of Vf_Square can be very low, just I need to record the initial current when the voltage first goes up. According the the simulation, the initial current is kept until the voltage goes back down. That initial current is what I need for the amplifier)
enter image description here

Source Link
kintaro
kintaro
  • 347
  • 2
  • 8

Current sensing using transimpedance amplifier

I am looking for a way to create a Transimpedance Amplifier like below (to convert current to voltage)
enter image description here enter image description here
The problem now is how to add the current source?
enter image description here
The current I want is the one read from I_probe like the circuit below.
How do I transfer this current to the Amplifier without affecting the circuit below? enter image description here