I want to design an audio mixer. The audio signal comes from a phone connectoran audio jack and is then buffered by an op amp. I want to have an LED that indicates whether the signal is close to saturation for this op amp.
I have a voltage divider that gives me the comp reference at 75% between V- and V+.
Will the following circuit work for my use case? Do I need to add a diode to act as a peak detector?
I want to design an audio mixer. The audio signal comes from a phone connector and is then buffered by an op amp. I want to have an LED that indicates whether the signal is close to saturation for this op amp.
I have a voltage divider that gives me the comp reference at 75% between V- and V+.
Will the following circuit work for my use case? Do I need to add a diode to act as a peak detector?
I want to design an audio mixer. The audio signal comes from an audio jack and is then buffered by an op amp. I want to have an LED that indicates whether the signal is close to saturation for this op amp.
I have a voltage divider that gives me the comp reference at 75% between V- and V+.
Will the following circuit work for my use case? Do I need to add a diode to act as a peak detector?
I want to design an audio mixer. The audio signal comes from a phone connector and is then buffered by an op amp. I want to have aan LED that indicates whether the signal is close to saturation for this op amp.
I have a voltage divider that gives me the comp reference at 75% between V- and V+.
IsWill the following circuit workswork for my use case ? Do I need to add a diode to actsact as a peak detector ?
I want to design an audio mixer. The audio signal comes from a phone connector and is then buffered by an op amp. I want to have a LED that indicates whether the signal is close to saturation for this op amp.
I have a voltage divider that gives me the comp reference at 75% between V- and V+.
Is the following circuit works for my use case ? Do I need to add a diode to acts as a peak detector ?
I want to design an audio mixer. The audio signal comes from a phone connector and is then buffered by an op amp. I want to have an LED that indicates whether the signal is close to saturation for this op amp.
I have a voltage divider that gives me the comp reference at 75% between V- and V+.
Will the following circuit work for my use case? Do I need to add a diode to act as a peak detector?
I want to design an audio mixer. The audio signal comes from a phone connector and is then buffered by an op amp. I want to have a LED that indicates whether the signal is close to saturation for this op amp.
I have a voltage divider that gives me the comp reference at 75% between V- and V+.
Is the following circuit works for my use case ? Do I need to add a diode to acts as a peak detector ?
