Timeline for How to Switch DSP to Passive Speaker Driver?
Current License: CC BY-SA 4.0
13 events
when toggle format | what | by | license | comment | |
---|---|---|---|---|---|
S Oct 24, 2023 at 16:06 | history | bounty ended | CommunityBot | ||
S Oct 24, 2023 at 16:06 | history | notice removed | CommunityBot | ||
Oct 21, 2023 at 23:25 | comment | added | Firat Dagkiran | INT+ (Intercom Signal) can drive 50ohm speaker. It has a 3Vpeak voltage level with a 500mW power. Regarding the backup power supply, I have nothing to do with it. I only design the headset electronics; power comes from the customer intercom system. Think about a headset connected to intercom systems that take inputs: power and intercom (INT+). | |
Oct 19, 2023 at 12:10 | comment | added | citizen | Do you have any further details on the intercom signal, like its nominal rms voltage and peak voltage, what impedance is it ment to drive, etc. where is it coming from and what was it intended to drive ? You'll need to add this info to your question for clarification. | |
Oct 19, 2023 at 12:07 | comment | added | citizen | @Firat Dagkiran. Can the intercom signal drive the speaker(s) without any amplification directly ? You need to work this out if it's indeed even possible to drive the speakers directly without it being processed by the codec. If the intercom signal cannot drive the headset speakers then there's no point in even trying to do what you want to do, and you'll need some temporary and infallible back-up power supply source like already mentioned. However if the intercom signal is strong enough to drive the speaker(s) then maybe there's a solution for what you're wanting to do ... | |
Oct 17, 2023 at 9:02 | comment | added | greybeard |
during [an interruption] of power, the headset user should not lose the intercom signal Whatever not lose the intercom signal means specifically, for an electric gizmo to keep working during a significant interruption of its primary supply of power, you need some backup, often battery. Uninterruptible Power Supply means mains power to same voltage&frequency more often than not.
|
|
S Oct 16, 2023 at 15:03 | history | bounty started | Firat Dagkiran | ||
S Oct 16, 2023 at 15:03 | history | notice added | Firat Dagkiran | Authoritative reference needed | |
Aug 7, 2023 at 11:20 | history | edited | Firat Dagkiran | CC BY-SA 4.0 |
edited title
|
Aug 1, 2023 at 18:23 | history | edited | JYelton | CC BY-SA 4.0 |
deleted 12 characters in body
|
Aug 1, 2023 at 14:54 | history | edited | Firat Dagkiran | CC BY-SA 4.0 |
edited body
|
Aug 1, 2023 at 14:49 | history | edited | Neil_UK | CC BY-SA 4.0 |
formatting
|
Aug 1, 2023 at 14:46 | history | asked | Firat Dagkiran | CC BY-SA 4.0 |