Return to Question

I have submitted my PCB design to JLCPCB for population. They are asking me if the orientation of my capacitors are correct:

My PCB and schematic of it:

In the datasheet it states that these are non-polarized according to the schematic:

Am I correct? Should I tell them it does not matter which orientation it is in?

The part numbers are as follows:

22uf 16v Kyocera AVX TAJB226K016RNJ (datasheet, LCSC, Footprint, Symbol and 3D model)

10uf 50v KEMET T491X106M050AT (datasheet, LCSC, Footprint, Symbol and 3D model)

I have submitted my PCB design to JLCPCB for population. They are asking me if the orientation of my capacitors are correct:

My PCB and schematic of it:

In the datasheet it states that these are non-polarized according to the schematic:

Am I correct? Should I tell them it does not matter which orientation it is in?

The part numbers are as follows:

22uf 16v Kyocera AVX TAJB226K016RNJ (datasheet, LCSC, Footprint, Symbol and 3D model)

10uf 50v KEMET T491X106M050AT (datasheet, LCSC, Footprint, Symbol and 3D model)

UPDATE Changing the caps to the following:

22uf 16v Taiyo Yuden EMK325BJ226MM-P (datasheet, LCSC, Footprint, Symbol and 3D model)

10uf 50v Taiyo Yuden UMK325BJ106KM-P (datasheet, LCSC, Footprint, Symbol and 3D model)

I have submitted my PCB design to JLCPCB for population. They are asking me if the orientation of my capacitors are correct:

My PCB and schematic of it:

In the datasheet it states that these are non-polarized according to the schematic:

Am I correct? Should I tell them it does not matter which orientation it is in?

The part numbers are as follows:

22uf 16v Kyocera AVX TAJB226K016RNJ (datasheet, LCSC)

10uf 50v KEMET T491X106M050AT (datasheet, LCSC)

I have submitted my PCB design to JLCPCB for population. They are asking me if the orientation of my capacitors are correct:

My PCB and schematic of it:

In the datasheet it states that these are non-polarized according to the schematic:

Am I correct? Should I tell them it does not matter which orientation it is in?

The part numbers are as follows:

22uf 16v Kyocera AVX TAJB226K016RNJ (datasheet, LCSC, Footprint, Symbol and 3D model)

10uf 50v KEMET T491X106M050AT (datasheet, LCSC, Footprint, Symbol and 3D model)

I have submitted my PCB design to JLCPCB for population. They are asking me if the orientation of my capacitors are correct:

My PCB and schematic of it:

In the datasheet it states that these are non-polarized according to the schematic:

Am I correct? Should I tell them it does not matter which orientation it is in?

I have submitted my PCB design to JLCPCB for population. They are asking me if the orientation of my capacitors are correct:

My PCB and schematic of it:

In the datasheet it states that these are non-polarized according to the schematic:

Am I correct? Should I tell them it does not matter which orientation it is in?

The part numbers are as follows:

22uf 16v Kyocera AVX TAJB226K016RNJ (datasheet, LCSC)

10uf 50v KEMET T491X106M050AT (datasheet, LCSC)