Timeline for Is it safe to solder 230V wire on relay?
Current License: CC BY-SA 4.0
4 events
| when toggle format | what | by | license | comment | |
|---|---|---|---|---|---|
| Nov 21 at 17:21 | comment | added | D.A.S. | Tobais, Do as he did, not as he says for DIY. The fact that you used tin & heatshrink tells us a lot. | |
| Nov 21 at 15:45 | comment | added | tobiasBora | Ok, thanks a lot, I thought the issue might be related with the difference in width between the small pins and the big input wire, but good to know that what can go wrong is actually if the element mechanically move. | |
| Nov 21 at 15:01 | history | edited | Simon Fitch | CC BY-SA 4.0 |
Injury
|
| Nov 21 at 14:56 | history | answered | Simon Fitch | CC BY-SA 4.0 |