I am trying to interface Sandisk SDHC micro sd card of 8GB size with MSP430FR5969. I am able to initialize the SD card correctly in SPI mode. But When I try to read CSD with CMD9 it responds with 0xFF time out error. It is not responding with 0x00 (R1 response in SPI mode). Please help.
\$\begingroup\$
\$\endgroup\$
1
-
\$\begingroup\$ Consider marking an answer accepted if it helped you. \$\endgroup\$– pipeCommented May 19, 2018 at 7:58
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
I have resolved it. We have to send 2 bytes of dummy characters before the CMD9 command. I sent only 1. Problem resolved