I own a Brymen BM235 multimeter, among other test instruments. While it's a nice multimeter, I have one problem with it: the fuse for the mA jack is a Siba 7017240.0,4, and nobody even bothers with putting this part in their catalog, never mind stocking it. (Octopart shows no results at all. That's how bad this situation is.)
However, the adjacent values (315mA and 500mA) in the Siba 7017240 line are stocked. Given that my BM235 (interestingly enough) says 600mA on the front for the maximum current it can measure using the mA jack, which fuse (315mA or 500mA) should I substitute for the unobtanium 400mA fuse, or should I try to poke Brymen or the distributor I got the meter through about this little conundrum? Or should I try to find a way to get Siba to point me at where I can get these in the USA? (It's the one fuse I don't have spares on-hand for at the moment -- even though I generally don't blow meter fuses to begin with, and haven't blown the one in the Brymen, I'd rather be prepared in this case.)