1
\$\begingroup\$

I want to wire up this board but I don't think I have the proper equipment for it. It's a Tianma LCD with a controller board that is displayed below. It's TM035KDH03.

Controller board

Here's what it comes with:

enter image description here

Need help powering this up. If anyone has any separate documentation, that'll also be helpful.

\$\endgroup\$

1 Answer 1

Reset to default
1
\$\begingroup\$

The four wires on the connector should be all you need to get it working with a composite video source. The red wire and the black one next to it are for power. I tested mine using a 9V battery (red is +, black is -). The yellow wire is the center pin on your composite video cable, and the black wire next to it is the ground of the video cable.

Hope that helps.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.