How do you decide the best choice?
Define your acceptance criteria based on Vin-out Static Tolerance and Step load error at a minimum with test results using your worst specs. Then test in a representative PCB layout and verify and record margins at worst case temp for your environment and worst case step and preloads. 0 preload is worst.
If you don't recognize the differences below or that some do not specify stability margins, then consult with someone who does or read more about phase margin and ask a better question.
PN Vout tol. Imax Typ Load Reg. @0.8A Zo Vin-out [email protected] Cout
======= ==== ==== === ==== ====== ============ ====
AMS1117 3.3V 1.5% 1A 3 mV 3mV/0.8A= 3.75mΩ 1.1V 22µF solid tant.
NCP1117 3.3V 1% 1.5A 4.3 mV 4.3m/0.8A= 5.38mΩ 1.07V 80mV typ 0.1 to 0.5A step @ 10uF
calc...NCP1117 80mV/500mA = 160 mΩ 80mV= = +/-2% error from 400mA steps with 100mA preload
NCP Instability points
1A step load CESR= 50uF1mΩ=50ns, 20uF10mΩ=200ns, 2uF80mΩ=160ns, 1uF*200mΩ=200ns
Static Load >20mΩ 10uF ceramic input , 10uF Tantalum output