Search Results
| Search type | Search syntax |
|---|---|
| Tags | [tag] |
| Exact | "words here" |
| Author |
user:1234 user:me (yours) |
| Score |
score:3 (3+) score:0 (none) |
| Answers |
answers:3 (3+) answers:0 (none) isaccepted:yes hasaccepted:no inquestion:1234 |
| Views | views:250 |
| Code | code:"if (foo != bar)" |
| Sections |
title:apples body:"apples oranges" |
| URL | url:"*.example.com" |
| Saves | in:saves |
| Status |
closed:yes duplicate:no migrated:no wiki:no |
| Types |
is:question is:answer |
| Exclude |
-[tag] -apples |
| For more details on advanced search visit our help page | |
Results tagged with mplabx
Search options answers only
not deleted
user 35530
MPLAB® X IDE is an IDE to develop applications for Microchip microcontrollers and digital signal controllers.
3
votes
Malfunctioning voltage output in PIC16F84A
The diagram you show has no clock components, that alone is enough to keep it from doing anything. The configuration choices are:
• LP Low Power Crystal
• XT Crystal/Resonator
• HS High Speed Crystal/ …
0
votes
Analog port reading issue in PIC12F510
This kind of thing is a bit annoying
DelayMs(10); // 100 ms
and doesn't match this
Timing should be 1000 ms / 3000 ms / 5000 ms / 10000 ms.
Where are you getting the pot comparison numbers from? 2 …
2
votes
Does anyone know if there is a way to increase the power of the PIC16F pin using MPLABX?
There should not be any difference in pin behaviour between compilers. XC8 emits a BSF PORTB, 0x4 and I assume Mikro would do the same if you used PORTB.B4 rather than PORTB.B5. The delays you have in …
3
votes
Accepted
Why can't I drive pin RA4 low on PIC16F1823?
You should always write to the latch (LATA4 in this case) and read from RA4, otherwise you can have issues because of the read-modify-write problem with writing to RA4, depending on what is connected …
1
vote
MPLAB X XC8 error expression is not assignable and invalid digit 'F' in octal constant
Perhaps you didn't write this code.. you've got constants for some other compiler (not xc8) mixed in there.
Check out the pic16f883.h header file for the proper bitfield and other definitions for x …
0
votes
Accepted
PIC MCU PIC16F887 not working with external power
The power source has nothing to do with debug vs. release. You can set the debug tool to supply power or not. The debug release requires the debugger attached to the data and clock lines in order to r …
8
votes
How to include math.h on a PIC?
You should actually look at the math.h file and figure it out (tm). Also it would be helpful if you mentioned the actual PIC part number you're trying to use.
To answer your actual question, you ar …
2
votes
Accepted
Which is better after rewriting the ROM on a PIC16F? A software reset instruction or a watch...
I would say your program is sub-optimal if you only read the calibration values once (at start-up). If you re-read them continuously you can avoid the need for a reset entirely and avoid the possibili …
2
votes
Maximum length of variable and function names?
Any limitation to the length of the identifiers is implementation-dependent, but the first 31 characters should be significant in a conforming implementation.
To make that clear, it's okay to allow …