I think I got this working for a single motor circuitlab.com/circuit/4p5cgq/screenshot/1024x768

@stevenvh I do not know, I will have to ask the customer. He just said that all devices need UL certification to be allowed on site.

@Craig Yes I am sure that I have connected the arduino to the LED strip lights. I'm NOT sure If I connected it correctly. See above for pin out that I am using.

The Adafruit version uses a LPD8806 and is different then the one I purchased. but they provide a library for LPD6803 version as well. If you look at the picture, You should see that D1 and L1 have two wires connected to the terminals. These lead to a barrel connector that I connect to a power adapter. This connections was already assembled on purchase. You can also see the chip and its model in the picture. Yes I am sure it is LPD6803.