Return to Answer

Although in the paragraph you emphasized, they use the word and:

The MSSP module can operate in one of two modes:

 

• Serial Peripheral Interface (SPI)
• Inter-Integrated Circuit (I2C™)

Datasheet, page 164.

But you can software implement the I2C protocol on other pins.

However:

You can normally mix I2C and SPI on the same pins. I2C only does something between START and STOP.

According to http://www.i2cchip.com/mix_spi_i2c.html

Also check this: I2C and SPI ,if they share same connection , is there confilict or not

Although in the paragraph you emphasized, they use the word and:

The MSSP module can operate in one of two modes:

• Serial Peripheral Interface (SPI)
• Inter-Integrated Circuit (I2C™)

Datasheet, page 164.

But you can software implement the I2C protocol on other pins.

However:

You can normally mix I2C and SPI on the same pins. I2C only does something between START and STOP.

According to http://www.i2cchip.com/mix_spi_i2c.html

Also check this: I2C and SPI ,if they share same connection , is there confilict or not

Although in the paragraph you emphasized, they use the word and:

The MSSP module can operate in one of two modes:

• Serial Peripheral Interface (SPI)
• Inter-Integrated Circuit (I2C™)

Datasheet, page 164.

But you can software implement the I2C protocol on other pins.

However:

You can normally mix I2C and SPI on the same pins. I2C only does something between START and STOP.

According to http://www.i2cchip.com/mix_spi_i2c.html

Also check this: I2C and SPI ,if they share same connection , is there confilict or not

Although in the paragraph you emphasized, they use the word and:

The MSSP module can operate in one of two modes:

• Serial Peripheral Interface (SPI)
• Inter-Integrated Circuit (I2C™)

Datasheet, page 164.

But you can software implement the I2C protocol on other pins.

However:

You can normally mix I2C and SPI on the same pins. I2C only does something between START and STOP.

According to http://www.i2cchip.com/mix_spi_i2c.html

Also check this: I2C and SPI ,if they share same connection , is there confilict or not

Although in the paragraph you emphasized, they use the word and:

The MSSP module can operate in one of two modes:

• Serial Peripheral Interface (SPI)
• Inter-Integrated Circuit (I2C™)

Datasheet, page 164.

But probably you can software implement the I2C protocol on other pins.

You can normally mix I2C and SPI on the same pins. I2C only does something between START and STOP.

According to http://www.i2cchip.com/mix_spi_i2c.html

Although in the paragraph you emphasized, they use the word and:

The MSSP module can operate in one of two modes:

• Serial Peripheral Interface (SPI)
• Inter-Integrated Circuit (I2C™)

Datasheet, page 164.

But you can software implement the I2C protocol on other pins.

However:

You can normally mix I2C and SPI on the same pins. I2C only does something between START and STOP.

According to http://www.i2cchip.com/mix_spi_i2c.html

Also check this: I2C and SPI ,if they share same connection , is there confilict or not