Skip to main content
Electrical Engineering

Return to Question

Grammar and word flow
Source Link
Dan Laks
Dan Laks
  • 8.6k
  • 4
  • 29
  • 44

i want Sending data from 4 transmitters to send individual data to 1 receiver and i dont want anywithout a microcontroller on the transmitter

I am working on a project where. I have to wirelessly check normal 4whether any of four switches isare pressed or not wirelessly and I don't want any micro-controller atto use a microcontroller on the transmitter side  . iI have worked with the 434mhz the cheap 434MHz HT12E/D modules with ht12e/dbefore, but they get jamjammed when more then one transmitters are onis transmitting at the samea time  .plese give Are there any alternate solution for checking the state .alternative solutions to this problem?

i want 4 transmitters to send individual data to 1 receiver and i dont want any microcontroller on the transmitter

I am working on a project where. I have to check normal 4 switches is pressed or not wirelessly and don't want any micro-controller at the transmitter side  . i have worked with the 434mhz cheap modules with ht12e/d but they get jam when more then one transmitters are on at the same time  .plese give any alternate solution for checking the state .

Sending data from 4 transmitters to 1 receiver without a microcontroller

I am working on a project to wirelessly check whether any of four switches are pressed and I don't want to use a microcontroller on the transmitter side. I have worked with the cheap 434MHz HT12E/D modules before, but they get jammed when more then one is transmitting at a time. Are there any alternative solutions to this problem?

Source Link
Meet Patel
Meet Patel
  • 1
  • 1

i want 4 transmitters to send individual data to 1 receiver and i dont want any microcontroller on the transmitter

I am working on a project where. I have to check normal 4 switches is pressed or not wirelessly and don't want any micro-controller at the transmitter side . i have worked with the 434mhz cheap modules with ht12e/d but they get jam when more then one transmitters are on at the same time .plese give any alternate solution for checking the state .