Skip to main content
Electrical Engineering

Return to Question

Tweeted twitter.com/#!/StackElectronix/status/143017531601457152
added 102 characters in body
Source Link
Majenko
Majenko
  • 56.4k
  • 9
  • 106
  • 190

I've got a circuit diagram I'm working from, this one http://bdmizan.com/Image/opamp46.gif:

enter image description here

And I'm currently trying to breadboard it, as seen here: http://instagr.am/p/XCj7l

enter image description here

I've been trying to search google on how to wire a Relay, and am not yielding any viable results. I've got a omron 5VDC with 5 pins, 2 on the bottom, 3 on the top.

I think I've figured out that the bottom 2 pins are for power, and the top 3 are for output, in some way. :S I'm going to be connecting the output of the relay to an AND gate to test if a switch is on, and act if both inputs are ON.

Two questions? How do I wire up the relay? and Is the circuit so far matching the diagram? (if you can't tell from the instagram image, forget this question!)

ALSO: I did change it slightly, there is no variable resistor, instead there's an 'average' 100Ohm resistor.

Thank you very much! Cheers, John

I've got a circuit diagram I'm working from, this one http://bdmizan.com/Image/opamp46.gif

And I'm currently trying to breadboard it, as seen here: http://instagr.am/p/XCj7l

I've been trying to search google on how to wire a Relay, and am not yielding any viable results. I've got a omron 5VDC with 5 pins, 2 on the bottom, 3 on the top.

I think I've figured out that the bottom 2 pins are for power, and the top 3 are for output, in some way. :S I'm going to be connecting the output of the relay to an AND gate to test if a switch is on, and act if both inputs are ON.

Two questions? How do I wire up the relay? and Is the circuit so far matching the diagram? (if you can't tell from the instagram image, forget this question!)

ALSO: I did change it slightly, there is no variable resistor, instead there's an 'average' 100Ohm resistor.

Thank you very much! Cheers, John

I've got a circuit diagram I'm working from, this one:

enter image description here

And I'm currently trying to breadboard it, as seen here:

enter image description here

I've been trying to search google on how to wire a Relay, and am not yielding any viable results. I've got a omron 5VDC with 5 pins, 2 on the bottom, 3 on the top.

I think I've figured out that the bottom 2 pins are for power, and the top 3 are for output, in some way. :S I'm going to be connecting the output of the relay to an AND gate to test if a switch is on, and act if both inputs are ON.

Two questions? How do I wire up the relay? and Is the circuit so far matching the diagram? (if you can't tell from the instagram image, forget this question!)

ALSO: I did change it slightly, there is no variable resistor, instead there's an 'average' 100Ohm resistor.

Thank you very much! Cheers, John

Source Link
John B
John B
  • 51
  • 1
  • 2

Relay? No clue how to breadboard?

I've got a circuit diagram I'm working from, this one http://bdmizan.com/Image/opamp46.gif

And I'm currently trying to breadboard it, as seen here: http://instagr.am/p/XCj7l

I've been trying to search google on how to wire a Relay, and am not yielding any viable results. I've got a omron 5VDC with 5 pins, 2 on the bottom, 3 on the top.

I think I've figured out that the bottom 2 pins are for power, and the top 3 are for output, in some way. :S I'm going to be connecting the output of the relay to an AND gate to test if a switch is on, and act if both inputs are ON.

Two questions? How do I wire up the relay? and Is the circuit so far matching the diagram? (if you can't tell from the instagram image, forget this question!)

ALSO: I did change it slightly, there is no variable resistor, instead there's an 'average' 100Ohm resistor.

Thank you very much! Cheers, John