I'm just wondering what would be considered industry practice of communicating between multiple micro controllers on the same pcb for instance when the digital i/o's or analog ins have been used.
\$\begingroup\$
\$\endgroup\$
1
-
1\$\begingroup\$ How many microcontrollers? What's the max data rate that you are expecting? \$\endgroup\$– Nick AlexeevCommented Mar 5, 2015 at 22:56
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
There are numerous standardized link layer interfaces available - typically at least I2C, SPI, UART and parallel - but to the best of my knowledge there are no uniformly accepted standards for higher level protocol layers for inter-MCU comms. If you need to do it then you just roll your own to suit your particular requirements.
