What would be the best way to connect to a 3x2 group of solder pads? I created my own 3x2 connector (pardon the poor soldering), but there must be a more off the shelf way? I haven't been able to find anything. Anybody have any ideas? Images below
\$\begingroup\$
\$\endgroup\$
2
-
1\$\begingroup\$ Well ... The 1st answer is to learn to solder. Sorry. But that's just awful ... I've seen many right-angle SMD connectors soldered to commercial boards with a very similar layout and it works just fine. \$\endgroup\$– brhansCommented Nov 7, 2017 at 17:34
-
\$\begingroup\$ You go to the website of one of the larger dealers and search for right angle smd headers. There's more versionsvof what you are looking for than you can shake a stick at. \$\endgroup\$– JRECommented Nov 7, 2017 at 17:56
Add a comment
|
2 Answers
\$\begingroup\$
\$\endgroup\$
SMT Header
Search all the likely distributors. They all have them. The vertical versions are easier to solder by hand.
\$\begingroup\$
\$\endgroup\$
Or a right angle SMD header.
Also available in female header types.
