1
\$\begingroup\$

Mitutoyo is using this connector in their Digimatic dial indicators. Is this "a standard" connector available from some connector manufacturer?

The connector is 10mm wide with five contacts.

enter image description hereenter image description here

I have this same question here: https://engineering.stackexchange.com/questions/61680/identifying-mitutoyo-connector. If this is against some policy, please let me know.

\$\endgroup\$
3
  • \$\begingroup\$ Please add pictures of its mate (what this plug plugs into). Please measure and report the accurate pitch. \$\endgroup\$
    – Davide Andrea
    Commented Oct 17 at 12:18
  • 1
    \$\begingroup\$ What is connector pitch and how to measure it? \$\endgroup\$
    – Lundin
    Commented Oct 17 at 12:25
  • \$\begingroup\$ I derived the pitch to be approximately 1.625 mm. \$\endgroup\$
    – Davide Andrea
    Commented Oct 17 at 13:16

1 Answer 1

Reset to default
1
\$\begingroup\$

I found this Google doc page from the catalog.

Connector only, Mitutoyo 06AFM380F:

https://www.microridge.com/products/mitutoyo-905338-cable/

https://www.judgetool.com/products/microridge-mitutoyo-connection-cable-for-gages-that-use-mitutoyo-905338-cable-m/

Complete cable, Mitutoyo 905338:

https://www.amazon.com/Mitutoyo-905338-Digimatic-Connecting-Straight/dp/B002SG7PPW

https://www.grainger.com/product/MITUTOYO-Data-Output-Cable-Straight-1ZRN7

Is this "a standard" connector available from some connector manufacturer?

No. It's a custom connector.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.