Which camera module will interface with STM32F7 Disco board? The connector on the board is a 30-pin FPC/FFC 0.5mm.
Could the OV2640 be adapted for this?
\$\begingroup\$
\$\endgroup\$
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
From STM32F7 User Manual, page 16:
A connector P1 with the DCMI signals is available to connect a camera module such as STM32F4DIS-CAM (ST order code)
So the camera module that recommended by manufacturer is STM32F4DIS-CAM, see this ST page, Digikey, or other distributors.
For your questions:
Could the OV2640 be adapted for this?
I think the answer is Yes. There are many projects on the web that connecting OV2640 to STM32 family module, for example this with DCMI or this without DCMI.
