Skip to main content
Electrical Engineering

Return to Question

deleted 1 character in body
Source Link
JRE
JRE
  • 73.6k
  • 10
  • 112
  • 195

I am doing an allgorithmicalgorithmic state machine in VHDL. It models a slot machine. It uses debouncing for the start and end input signals. I need to implement it later on a Basys 3 FPGA. The start and end input signals are modeled with the FPGA buttons. The frequency of the CLK signal of the Basys3 FPGA is 100 MHz. Therefore the period of CLK must be 10^-8 seconds= 10*10^-9 seconds = 10 ns.

  • What time length do you recommend for the press debouncing time when pressing the buttons of the Basys3?
  • What time length do you recommend for the release debouncing time when releasing the buttons of the Basys3?

I am doing an allgorithmic state machine in VHDL. It models a slot machine. It uses debouncing for the start and end input signals. I need to implement it later on a Basys 3 FPGA. The start and end input signals are modeled with the FPGA buttons. The frequency of the CLK signal of the Basys3 FPGA is 100 MHz. Therefore the period of CLK must be 10^-8 seconds= 10*10^-9 seconds = 10 ns.

  • What time length do you recommend for the press debouncing time when pressing the buttons of the Basys3?
  • What time length do you recommend for the release debouncing time when releasing the buttons of the Basys3?

I am doing an algorithmic state machine in VHDL. It models a slot machine. It uses debouncing for the start and end input signals. I need to implement it later on a Basys 3 FPGA. The start and end input signals are modeled with the FPGA buttons. The frequency of the CLK signal of the Basys3 FPGA is 100 MHz. Therefore the period of CLK must be 10^-8 seconds= 10*10^-9 seconds = 10 ns.

  • What time length do you recommend for the press debouncing time when pressing the buttons of the Basys3?
  • What time length do you recommend for the release debouncing time when releasing the buttons of the Basys3?
deleted 12 characters in body; edited title
Source Link
JRE
JRE
  • 73.6k
  • 10
  • 112
  • 195

recommended Recommended time length of pressionpress debouncing/ depressionrelease debouncing with buttons of Basys3 FPGA

I am doing an Algorithmic State Machineallgorithmic state machine in VHDL. It models a slot machine. It uses debouncing for the start and end input signals. I need to implement it later on ana Basys 3 FPGA and the. The start and end input signals getare modeled with the FPGA buttons. The frequency of the CLK signal of the Basys3 FPGA is 100 MHz. Therefore the period of CLK must be 10^-8 seconds= 10*10^-9 seconds = 10 ns.

What time length do you recommend for the pression debouncing time when pressing the buttons of the Basys3? What time length do you recommend for the depression debouncing time when releasing the buttons of the Basys3?

Thanks

  • What time length do you recommend for the press debouncing time when pressing the buttons of the Basys3?
  • What time length do you recommend for the release debouncing time when releasing the buttons of the Basys3?

recommended time length of pression debouncing/ depression debouncing with buttons of Basys3 FPGA

I am doing an Algorithmic State Machine in VHDL. It models a slot machine. It uses debouncing for the start and end input signals. I need to implement it later on an Basys 3 FPGA and the start and end input signals get modeled with the FPGA buttons. The frequency of the CLK signal of the Basys3 FPGA is 100 MHz. Therefore the period of CLK must be 10^-8 seconds= 10*10^-9 seconds = 10 ns.

What time length do you recommend for the pression debouncing time when pressing the buttons of the Basys3? What time length do you recommend for the depression debouncing time when releasing the buttons of the Basys3?

Thanks

Recommended time length of press debouncing/release debouncing with buttons of Basys3 FPGA

I am doing an allgorithmic state machine in VHDL. It models a slot machine. It uses debouncing for the start and end input signals. I need to implement it later on a Basys 3 FPGA. The start and end input signals are modeled with the FPGA buttons. The frequency of the CLK signal of the Basys3 FPGA is 100 MHz. Therefore the period of CLK must be 10^-8 seconds= 10*10^-9 seconds = 10 ns.

  • What time length do you recommend for the press debouncing time when pressing the buttons of the Basys3?
  • What time length do you recommend for the release debouncing time when releasing the buttons of the Basys3?
Source Link
goahead97
goahead97
  • 33
  • 4

recommended time length of pression debouncing/ depression debouncing with buttons of Basys3 FPGA

I am doing an Algorithmic State Machine in VHDL. It models a slot machine. It uses debouncing for the start and end input signals. I need to implement it later on an Basys 3 FPGA and the start and end input signals get modeled with the FPGA buttons. The frequency of the CLK signal of the Basys3 FPGA is 100 MHz. Therefore the period of CLK must be 10^-8 seconds= 10*10^-9 seconds = 10 ns.

What time length do you recommend for the pression debouncing time when pressing the buttons of the Basys3? What time length do you recommend for the depression debouncing time when releasing the buttons of the Basys3?

Thanks