I've read a lot of post saying that TIs XDS100v2 JTAG emulator is not supported by OpenOCD. However, looking at this link, I see that the XDS100v2 is a supported FTDI chip. So I'm kind of confused on if it is or not. I do have a license for Code Composer Studio but It may not always be available so I would like to have a backup plan.
\$\begingroup\$
\$\endgroup\$
3
-
\$\begingroup\$ I dont have any problems using openocd with an XDS100V2 board \$\endgroup\$– old_timerCommented Apr 30, 2016 at 23:33
-
\$\begingroup\$ CCS not required. what have you tried so far and what did it do or not do? \$\endgroup\$– old_timerCommented Apr 30, 2016 at 23:33
-
\$\begingroup\$ I don't have an XDS100v2 board currently. I wanted to make sure it's what I want. But I think it's a pretty good option. \$\endgroup\$– Caleb MerchantCommented May 1, 2016 at 0:56
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
2
OpenOCD ships config files for XDS100v2, so it is supported.
But you may need a different driver for OpenOCD that would prevent you from using CCS.
-
\$\begingroup\$ Do these drivers exists already? And when you say ship, you mean I can download them from somewhere right? \$\endgroup\$ Commented Apr 30, 2016 at 22:13
-
\$\begingroup\$ In the same archive file that contains the OpenOCD binary or source code. \$\endgroup\$– Turbo JCommented Apr 30, 2016 at 22:25