0
\$\begingroup\$

I'm trying to find the exact type of this 3-pin clippy connector - I need another one to connect the SBUS signal to the board:

Connector

Measures:

  • Pitch: ~1mm
  • Total width: ~6mm
  • Total height: ~3mm

I've been browsing the JST website and some types are close but not an exact match IMHO.

\$\endgroup\$
2
  • 2
    \$\begingroup\$ When dealing with small connectors, accurate measurements are necessary. I usually sketch them and add dimensions from a caliper. There are literally tens of thousands of connectors. \$\endgroup\$
    – rdtsc
    Commented Mar 4, 2021 at 20:21
  • 1
    \$\begingroup\$ Look for a manufacturers logo on both parts, might help \$\endgroup\$
    – Kyle B
    Commented Mar 5, 2021 at 0:33

1 Answer 1

Reset to default
1
\$\begingroup\$

A quick search on Digikey gives a lot of results.

This one looks quite similar to yours.

\$\endgroup\$

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.