2
\$\begingroup\$

I salved a lot of ICs but this one I couldn't find (and is maybe interesting enough to be play with it, since I never used an FPGA).

It's from a semiconductor chip production machine (high likely) and the PCB was marked 'Rejected' (but hope most ICs work) and was in the electronics garbage bin. So I don't know exactly for what device it was meant for.

It seems to be an Altera EPC3TC32, but where can I find the datasheet? Altera.com forwards to Intel and there I cannot find it.

The package is QFP32.

enter image description here enter image description here

\$\endgroup\$
3

1 Answer 1

6
\$\begingroup\$

The EPC devices are usually configuration devices (flash memory) not FPGAs. The Cyclone III FPGA part numbers would instead begin with EP3C (Cyclone III), and not EPC3.

You are correct there doesn't seem to be a matching part number. However I believe you may have misread the 3, and it is actually a 2.

That gives EPC2TC32, which is indeed an, albeit obsolete, Altera flash memory device. This is a 1.6Mbit Configuration Flash memory in a TQFP-32 package.

\$\endgroup\$
4
  • \$\begingroup\$ Thank you very much ... not sure if it will be that useful to play around with (having no FPGA or knowledge about it. Although if it's not related to FPGA maybe I can use it for something else. \$\endgroup\$ Commented May 16, 2020 at 15:31
  • 1
    \$\begingroup\$ @MichelKeijzers they're designed to store the bitstreams that program certain serie of FPGA (e.g. Cyclone and Cyclone II devices). Although in practice they are just serial flash memories so you could probably use it for something else. But given its obsolescence, probably not much use. \$\endgroup\$ Commented May 16, 2020 at 15:32
  • \$\begingroup\$ Also it has quite a l ot of pins and SPI flash memory is probably easier (WinBond) ... anyway, nice to have, and I learnt something new today (again). \$\endgroup\$ Commented May 16, 2020 at 15:37
  • \$\begingroup\$ Definitely not 3, which has a straight "head" stroke as opposed to a rounded "head" of 2. \$\endgroup\$ Commented Jul 30, 2020 at 19:55

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.