How do I find S parameters from Z parameters, for a two port network.
I am sorry to ask such an elementary question but I am not from an engineering background. I have tried to search answers online but could not find it.
\$\begingroup\$
\$\endgroup\$
4
-
1\$\begingroup\$ See if this helps. en.wikipedia.org/wiki/… A text book is given as reference. See if you can get a hold of that book. \$\endgroup\$– AJNCommented Jul 3, 2020 at 13:18
-
2\$\begingroup\$ rfcafe.com/references/electrical/s-h-y-z.htm \$\endgroup\$– Andy akaCommented Jul 3, 2020 at 13:38
-
1\$\begingroup\$ Here’s another website ... so what were you searching for in order to get no results or results you didn’t like? \$\endgroup\$– user103380Commented Jul 3, 2020 at 13:57
-
\$\begingroup\$ I think this is a great question, if we don't have a duplicate someone should provide an answer and document the answer here \$\endgroup\$– Voltage Spike ♦Commented Jul 4, 2020 at 17:07
Add a comment
|
1 Answer
\$\begingroup\$
\$\endgroup\$
2
This table gives the relationship between S, Z, Y and ABCD parameters. It's from David Pozar's "Microwave Engineering", 4th edition, page 192. If you are interested on the details, you can consult the book.
-
\$\begingroup\$ Though the answer does not explain how the transformation is made, but I accept it. \$\endgroup\$ Commented Jul 6, 2020 at 7:36
-
1\$\begingroup\$ @ChetanWaghela Z parameters relate currents to voltages. To do the transformation you must find the relationship between currents, voltages and incident and reflected power waves. I will add it to the answer later. \$\endgroup\$– MPA95Commented Jul 6, 2020 at 21:19