All Questions
Tagged with ce certification
33 questions
0
votes
2
answers
99
views
Can I safely operate a DC motor at 40% higher voltage than nominal?
I'm aware that you can power a wound motor (DC or even stepper) if you limit the current inside the coils. You cannot just apply a higher DC voltage to them.
I'm using a DRV8871 to control a VN-C1 ...
- 1,450
0
votes
1
answer
123
views
CE certification for changing USB port
I have a CE certified product that uses USB micro port.
In lieu with EU requirements that all products must use USB-C port, do we need to apply for get a new certification for CE if we change the USB ...
- 11
0
votes
0
answers
38
views
Product certification for devices mounted on elevators
Do products that will be mounted on elevators needs extra certifications (apart from FCC or CE) to be sold in North America and Europe?
The product will be connected in the roof of the car, connected ...
0
votes
1
answer
103
views
Product certification for NA and European market
We are developing a product that includes an already certified radio module. We even use the IC of the module as the controler of the hole device. In the device we include a RTC, a ROM, a motor ...
0
votes
1
answer
217
views
Is FCC/CE recertification needed if only the product name is changing?
I got FCC/CE certification for my product (a music player, unintentional radiator), but would now like to put out the same product under a new name. Nothing else is changing (PCB design, casing, etc. ...
- 233
0
votes
4
answers
614
views
Does a system assembled from CE marked parts (consumer products) still require CE testing?
Let's say you run a company that designs and installs speaker systems for clients. You hear their requirements, look at their space, and then select the most appropriate consumer products for their ...
3
votes
2
answers
399
views
Household appliances commercial project EU certification
I got a job to do a household appliances with wireless remote control. I’m working as embedded developer in current company, but we haven't had to certificate our solutions and I'm looking for advice.
...
- 73
1
vote
1
answer
879
views
Should I get CE mark on my Arduino project?
I just finished my big Arduino project after 2 years. I would like to start selling it, but I am not sure if I need CE certification or not. I used the below components:
Arduino Nano-oled 0,96"
...
- 13
2
votes
2
answers
244
views
Which products require EMC certificate?
What are the guidlines (or where can I find them) for which products require EMC testing certificate? I know that this determined per country, so for starters let's go with the US.
My product contains ...
- 159
0
votes
1
answer
705
views
ESD protection for power input with several fused branches
I'm designing an industrial board that will be powered with a +24V DC. On the PCB there are several fuses to protect each branch against over-current/short-circuit. Example:
simulate this circuit &...
- 1,450
0
votes
1
answer
245
views
If all parts in a product are FCC or CE certified then do i still need to apply for certification for the complete product?
I am building a CNC product and all the electronics parts we are using are either FCC or CE certified. Do I then have to obtain a separate certification for the product as a whole ?
Also any idea what ...
- 1
0
votes
0
answers
108
views
Bluetooth and Wifi Maximum Power limt
I saw below Bluetooth chip comparison of many module , most of all are having 8dbm max power , what I know FCC has 30dbm and CE has 20dbm Max power limit so why Bluetooth module are limited to only ...
- 53
4
votes
1
answer
865
views
Which standard must Li-ion battery fulfil for CE marking in late 2020, IEC 62133:2012 or IEC 62133-2:2017?
I am looking for a slim CE-certified rechargable battery to put in my product. All of the (very few) certified batteries that I have found are compliant with the IEC 62133:2012 (2nd edition). But that ...
- 81
0
votes
1
answer
243
views
CE/FCC/RoHS/etc certification for Intel NUC and other barebone MiniPCs?
Intel sell the Intel NUC without a hard drive or ram. They provide a list of compatible rams and drives. By sliding in the ram stick and drive, am I not invalidating all of the certificates on the ...
- 113
1
vote
3
answers
2k
views
How to get CE markings for a PC I assembled from CE certified components?
If I purchase a kit from a website like overclockers.co.uk which includes a quality power supply, motherboard, CPU, etc. Everything is CE certified and all components are the highest grade. All I am ...
- 113
0
votes
1
answer
85
views
FCC / CE requirements for adapter pcb?
A product consisting (electronically) just of a PCB with a male USB-C one one side, 5mm of traces and a female USB-C on the other end. No other components at all. To be used as consumer device.
How ...
- 111
4
votes
1
answer
3k
views
CE mark on a PCB sold as a part of a kit or part of a project, necessary?
I've a prototype that I want to sell as a product. My prototype is made by an aluminium structure, a motor, a moving part (made by 3D printer) and an electronic circuit.
The electronic circuit is ...
- 67
3
votes
1
answer
250
views
Running or belt conveyor with electric motors and control panel need a kind of certification to be sold in US market?
We want to provide new machinery of a runner conveyor and a belt conveyor in the US market.
The equipment consists of:
the basic construction (metal parts, runners, drums, and belts),
electric ...
- 31
0
votes
1
answer
56
views
Can we install product above FCC test power level declared in certification report
we have a product which has radio of 1W maximum output power , we have sent product for FCC through party lab, and they certified the product with 18 dbm only.
So we get the certificate with only 18 ...
- 792
1
vote
3
answers
1k
views
USB current draw and CE marking
We have developed a docking station product which charges multiple devices simultaneously, and currently ships with a 5V, 3A barrel jack adaptor. We are looking to move this over to USB power, and ...
- 11
0
votes
1
answer
268
views
EN 300 328 CE radio certification with power limit
We have developed product for Malesia country, where we need local SIRIM certificate.
RF module we used in our product is 2.4Ghz wifi mesh, with max 30dbm (1 watt) output power capacity.
To get ...
- 707
2
votes
1
answer
1k
views
CE marking of device that contains CE certified module
I am using a bluetooth module in an electronic product. This bluetooth module is CE certified.
When it comes to CE marking of the whole product, do I need to perform tests of the bluetooth part of ...
- 31
0
votes
1
answer
1k
views
Question about ETL and UL Certifications for battery powered tools
A friend is considering importing a 15 volt Lithium-Ion Battery (2600mAh) operated tool from China to sell to consumers in the USA.
The battery charger that comes with the sprayer has a stamp that ...
0
votes
2
answers
752
views
Do electronic devices like a servo motor need a certification to be sold in the US market?
We want to start a crowd funding project for our IoT servomotor. It comes with an integrated controller and an ethernet connection (no wireless) and now we are not sure about certifications (FCC, RoHS,...
- 11
2
votes
2
answers
609
views
CE and FCC for MCU boards/Raspberry Pi HATs/Arduino shields etc
There doesn't seem to be a great deal of information on the internet about this (and the information that there is is usually contradicted somewhere else), so I'm going to ask this here, in the hope ...
- 153
8
votes
1
answer
13k
views
How to find out which certificates (FCC, CE etc.) are necessary for a product?
Is there any way to find out which certificates are necessary for an electronic device to be sold / imported into US / Europe / Asia?
FCC and CE are common knowledge, but then there are other ...
- 205
6
votes
2
answers
22k
views
How can one verify if the FCC/CE certification mark on an electronic component or product is genuine?
Some companies can be unscrupulous and simply paste a label to fake FCC CE. How can one be sure the label is real?
Is there a website for checking the validity of the FCC CE mark?
- 1,257
1
vote
2
answers
362
views
Mains isolation is mandatory for UL/CE/CSA compliance and other certification?
I have a design with a non user accesible low voltage section.
Is mandatory to do mains isolation to pass succesfully UL/CE/CSA despite my low voltage section is not accesible for user?
0
votes
1
answer
257
views
Car electronic accessories [closed]
I want to design a computer vision device that will act as a "driving assistant". The device will improve driving safety by acoustically or visually alerting the driver of certain hazardous situations ...
- 481
1
vote
4
answers
26k
views
UL/CE/CSA certification for low voltage electronics/LED product?
I am working on a fairly simple LED product that would use an external power supply (12V). Certain configurations of the product may require more than 100W. I could also configure the product to use ...
- 11
2
votes
1
answer
550
views
Do we need the CE certification for test series in quantity of 100pcs
We are developing a multimedia application WiFi + Audio out + Mic Input + and few buttons), which we plan to produce in the number of 100 pieces and half of that sell to our aquaintances and the rest ...
- 23
6
votes
1
answer
9k
views
What certification do you need to sell electronic device to US market?
Other than FCC and RoHS statement, what other certifications do you need to have in order to sell your product to US Market?
My device is a remote control using Bluetooth Module. Operate using 4 x AA ...
- 509
33
votes
5
answers
21k
views
Things to watch out when applying FCC CE
I have a Bluetooth remote control device that uses 2 AA batteries. Due to positive feedback and responses, I'm thinking to sell it to the mass market. Thus I need FCC certification.
After reading many ...
- 509