Wire-to-Board connector identification Sinano Kenshi Stepper STP-43D1034

Question

I bought used Sinano Kenshi STP-43D1034 steppers with a connector attached the coils. Spent a few hours and wasn't able to identify the connector type. At this stage I would like to avoid changing the connector. It does not seem to be a JST or a Molex connector. Contact's pitch is 2mm or very close to that. Any suggestions what kind of connector that could be, would be very appreciated.

Answer 1

I identified it with my Identiconn utility.

It's a TE, CT.

https://connectorbook.com/identification.html?m=NN&n=lo_prof_1r_w2b_conn_2&s=CT%20(crimp%204w%201r)

2mm AMP CT Connectors

Housing: https://www.digikey.com/en/products/detail/te-connectivity-amp-connectors/179228-4/1855274

{Digikey}