0
\$\begingroup\$

almost everything is in title. I have a existing routing track and via. I would like to change side of all component. It's a 4 layer, so, in a perfect world : top component goes to bottom layer

  • top track to bottom layer
  • bottom track to top layer
  • ground layer does nothing
  • and mid layer with routing is flipped.

for the the last 2 options, I'll understand if this is not automated.

Does an automatic option exist for this kind of needs ?

Thanks a lot !

\$\endgroup\$
1
  • \$\begingroup\$ When you move a component from top to bottom, the footprint/pinout is mirrored, so it will not connect properly to the tracks that you moved to from top to bottom. \$\endgroup\$
    – Peter Bennett
    Commented Apr 4, 2020 at 16:26

1 Answer 1

Reset to default
2
\$\begingroup\$

This can be done using Edit -> Move -> Flip Selection (shortcut M I). It swaps all selected objects between Top and Bottom and mirrors objects in the inner layers.

\$\endgroup\$
2
  • \$\begingroup\$ This is exactly what I'm looking for. Thanks \$\endgroup\$
    – Dony
    Commented Apr 4, 2020 at 17:23
  • \$\begingroup\$ I just discovered that I can push on L when grab all my component to do the same task... \$\endgroup\$
    – Dony
    Commented Apr 4, 2020 at 17:32

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.