New answers tagged

0

I finally found the answer from the Nuvoton forum here which provides a general guide to programming Nuvoton micros. Could help someone looking for this info. As per the guide: Before using the ISP programming tool, user needs to program the boot code into LDROM by using a universal programmer or Nuvoton’s NuMicro® ICP Programming Tool, and the CBS(CONFIG0[...


0

Not 100% confident in this answer, but I think there is a lot of info that will help you so I'm putting it here for the better formatting. What to do First off, if your microcontroller does not have a valid program (meaning anything with the proper checksum) in application space, the board should enter bootloader mode automatically. If you programmed the ...


Top 50 recent answers are included