New answers tagged led-strip
0
votes
Why does a IRFP460 turning off an LED Strip but a IRLZ44N or IRL540N can't?
The IRLZ44 is specified for 50A loads, and your load (0.042A) isn't
anywhere near that. The use of a low-power switch FET will help,
or you could use a bipolar NPN transistor instead of a FET.
The
...
- 7,791
1
vote
Led light driver output voltage rise to 300vdc
LEDs have a very nonlinear current-voltage characteristic. Let me dust off my whiteboard.
The I-V curve for a LED, like most diodes, has an exponential dependence on voltage.
If you connect a voltage ...
- 23.1k
1
vote
What approach do you use to connect SM JST connectors from led strips to a PCB?
The JST SM connector is exclusively a wire-to-wire connector with crimp terminals. Therefore, it does not have any solderable family members. If you want a wire-to-board connector, then use a wire-to-...
- 25.5k
Top 50 recent answers are included